Products & materials

Storage modules & enclosures

PCM plates, thermal cores and complete enclosures, integrated for your operating conditions.

02 / Standard Plate Catalog

Standard plates by product line and phase-change temperature.

Building Comfort Standard Plate

edge comfort Indoor Temperature Control Module

Solid-state PCM standard plates for ceiling cavities, window-side cabinets, and interior assemblies, reducing daily temperature swings and improving indoor comfort.

300 × 300 mm · T3 30 / T5 50 mm · six phase-change temperatures, 22–32 °C · 0.154–0.257 kWh/plate

Download brochure → 中文 PDF → Deutsch PDF → View building application →

edge comfort PCM standard plate ceiling installation

PE-DC-CS

Data Center Cold Storage

5–32 °C, for chilled-water buffering, peak shifting, and cooling-loop stabilization.

Phase-change temperature	Chemistry	Request
5 °C	0.281-0.397 kWh	Email request
7 °C	0.274-0.434 kWh	Email request
10 °C	0.261-0.460 kWh	Email request
12 °C	0.274 kWh	Email request
15 °C	0.274-0.493 kWh	Email request
17 °C	0.274 kWh	Email request
18 °C	0.289-0.483 kWh	Email request
20 °C	0.279-0.500 kWh	Email request
21 °C	0.279 kWh	Email request
22 °C	0.263-0.403 kWh	Email request
23 °C	0.286 kWh	Email request
24 °C	0.286-0.556 kWh	Email request
25 °C	0.286 kWh	Email request
26 °C	0.286-0.559 kWh	Email request
27 °C	0.286 kWh	Email request
28 °C	0.286 kWh	Email request
30 °C	0.251-0.561 kWh	Email request
32 °C	0.247 kWh	Email request

PE-LNG

LNG Cold-Energy Recovery

Negative phase-change temperatures, for LNG cold-source recovery and low-temperature process buffering.

Phase-change temperature	Chemistry	Request
−39 °C	0.535 kWh	Email request
−24 °C	0.400 kWh	Email request
−21 °C	0.495 kWh	Email request
−19 °C	0.416 kWh	Email request
−15 °C	0.394 kWh	Email request
−10 °C	0.408 kWh	Email request
−5 °C	0.435 kWh	Email request

PE-HT

Heat Storage

Published phase-change temperatures for heating, waste-heat recovery, and process thermal management.

Phase-change temperature	Chemistry	Request
49 °C	0.255 kWh	Email request
58 °C	0.521 kWh	Email request
61 °C	0.254 kWh	Email request

This page summarizes published material and module data. Entries marked for technical confirmation require further review; use the relevant product data sheet and project confirmation for final selection. Request product manuals by email. Edge Comfort documents are available to download directly.

03 / Cooling Cabins

Cooling cabins for project-scale deployment.

Data Center Cooling Cabin

PE-DC-CS S-Type Data Center PCM Cooling Cabin Series

Series-level S-type cooling cabin manuals covering all published 5-32 °C PE-DC-CS phase-change temperatures, with capacity, water sensible energy, and discharge power calculated on one unified S-type basis.

PE-DC-CS-S SERIES · 18 phase-change temperatures, 5-32 °C · 347-680 kWh · up to 2.34 MW · S-type 2.8 × 2.3 × 2.3 m

Request English manual by email → Request Chinese manual by email → Request German manual by email →

Data-center standard cooling cabin installation

Tell us what you need.

Start with a temperature problem, a material need or a collaboration idea. You can get in touch before technical details are known.

Discuss a collaboration